Product Image

AROMATIC BASE COAT PC

Two-Component Urethane Base Coat  |   Excellent Adhesion and Durability

Guardian Roof Polymers AromaticBase Coat PC is a two-component bio-based urethane base coat that exhibitsstrong adhesion to numerous substrates. Itproduces a tough film that provides robustprotection to foam substrates and preventsoil migration on asphalt-based roofs. Thisproduct is not a finish coat and should betop coated with silicone, aliphatic urethane,or acrylic coatings to provide excellentweatherability, UV resistance, and highreflectance to promote a cool roof.

Pack Icon

PACK SIZE

4 U.S. GAL (15.14 L)

COLOR

Gray
Shield Icon

High Performance

Engineered for superior results

Protection Icon

Advanced Protection

Protects against harsh conditions

Clock Icon

Long Lasting

Built for extended durability

Leaf Icon

Low voc formulas

Safer for people and environment

Recommended Use

  • Guardian Roof Polymers Aromatic Base Coat PC is designed to rejuvenate and extend the life of aged asphaltic, single-ply and previously coated roofs. It provides excellent oil migration resistance on asphaltic roofs without the application of bleed blocking primers. It also provides excellent protection for foam roofs due to the tough cured film.

Thinning

  • Thinning is not normally required. If necessary, thin with an approved solvent within recommended limits.

Mixing

  • Mix both Part A and Part B thoroughly using a mechanical mixer before combining. Mix ratio is 4:1 (volume) of Part A to Part B.

Surface Preparation

  • Surface must be clean, dry, and free of dust, dirt, oil, grease, and other contaminants. Repair defects prior to coating.

Application

  • Product can be applied with phenolic core roller or brush. Flood coating can be used for covering aggregate coated tar and asphalt roofs. Apply mixed Aromatic Base Coat (Part A and Part B) at a rate of 2 gal/square to achieve a dry film thickness of 32 mils on smooth surfaces. On gravel surfaces, up to 6 gallons/square may be required to adequately cover the aggregate.

DRY TIME

  • 4 to 8 hours depending on conditions. Allow to cure overnight before top coating.

Limitations

  • Do not apply to previously silicone coated roofs or in areas where ponding water will be present.

AROMATIC BASE COAT PC

Color:Gray

HAZARD STATEMENTS: This mixture does not meet the criteria for classification to OSHA Hazard Communication Standard 2012 1900.1200 (HCS 2012).

PRECAUTIONARY STATEMENTS: PREVENTION: Observe good industrial hygiene practices. RESPONSE: Wash hands thoroughly after handling.

STORAGE AND DISPOSAL: Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations.

VOC CONTENT: <10 g/L (<0.083 lb/gal) EPA Method 24 (as applied)

WARNING: This product can expose you to Ethylbenzene, Naphthalene, which are known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
See Safety Data Sheet for further details regarding safe use of the product.

THIS PACKAGE FOR PROFESSIONAL/INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN.  REFER TO SDS FOR MORE INFORMATION.

Guardian Roof Polymers, Inc.
2851 Gold Tailings Ct., Rancho Cordova, CA 95670 916-447-2175
Manufactured in the U.S.A. with globally sourced materials.

For Chemical Emergency
Spill, Leak, Fire, Exposure, or Incident
CHEMTREC: Within USA and Canada: 1-800-424-9300 Outside USA and Canada: +1-703-527-3887 (collect calls accepted)